pompa sommersa 4"

ELECTRO PUMP:

Rotation: clockwise looking at the pump, motor side. Install the pump into artesian wells DN 76mm for 3" types, DN 100mm for 4" and DN 150/210mm for 6" be sure that the electropump is completely filled (clean waters, max temperature 45°C).

If there is sand (max 40 g/m3) beed the well before installing the electrosubmersible pump.

Do not run the pump with closed discharge head for more than 2 minutes.

Before starting the electro submersible pump for the first time check that air is nomore coming out from discharge pipe, gradually open the flood gate then start.
Install control panels for electrosubmersible pump with level sound to prevent dry starts.
With high lift plant of electro submersible pump or with pression accumulations install anti water-hammer valves. If the unit doesn't work for a long period, frequently start the electro submersible pump.

PRIMA POMPE ® by FINVALORI sas 33072 Casarsa (PN) ITALY Via Monte Grappa, 86/C P.IVA 01138200934 - Tel 0434/872802 Fax 0434/872802 - email: info@primapompe.com

Submersible water pump - Electrical submersible pump for water drainage. Particularly suitable in civil and industrial water systems as a drainage system. Electric submersible pump. Submersible sewage pump/sump pump for drainage. Particularly suitable in civil and industrial water systems, for non aggressive liquids, even with suspended solids and for basement drainage. Hand-carry submersible automatic water pumps in stainless steel. Can be used as a basement sump pump and is able to drain infiltrating water, cellars or resevoirs, clean or slightly dirty water and for lawn irrigation. Prima pompe produces mainly submersible pumps that include industrial pumps as well as well pumps for civil use. Sandfighter electric submersible pumps can be used for irrigation systems. Electrical submersible pump Sandfighter is irrigation system equipment. The Sandfighter's submersible motor casting is in stainless steel. Site Map

eXTReMe Tracker